The TCE-MD2418ES20AB Series 10/100Mbps 1 fiber port + 8 RJ45 ports Switch converts eight independent 10/100Base-TX twisted pair electrical signals and one single 100Base-FX optical signal to each other. It extends the network's reach from the 100M limit of copper to 120KM. By using switching and store-and-forward technology to enable data before the two network connections to the media, it greatly increases the fabric flexibility of Fiber Ethernet and Reduces the cost of the network set up to support dual-fiber multi-mode, dual-fiber single-mode, single-mode single-mode fiber and other optical transmission.
lStorage and forwarding capabilities to support rate adaptation and protocol translation;
lAdaptive connection 10M and 100M network and the network port supports full-duplex/ half-duplex adaptation and traffic control;
lAutomatic detection and correction of incorrect poles on each port of a twisted pair;
lData transfer rate (line speed) is 14,880 frames per second (10M);
lData transfer rate (line speed) is 14,8800 frames per second (100M);
lThe amount of power ≤ 5W;
lSupport 12K effective MAC address table; Supports MAC address learning and aging automatically;
l8 MB packet buffer;
lWith broadcast storm protection;
lFlexible access mode;
lHigh degree of system reliability and stability;
lComply with 10Base -T、100Base-T、100Base-FX and IEEE802.3u standard;
lMultimode transmission distance up to 2 km, single mode transmission distance up to 120 km;
lAll components using well-known foreign companies, circuit layout science, anti-interference ability;
lDynamic LED lights, working status at a glance;
lSupport MDI / MDI-X port automatically flip;
lSupport 1 optical port and 8 RJ45 ports;
lBuilt-in professional switching power supply, safe and stable, the whole power consumption is less than 10W;
lSupport physical isolation ;
lSupport VLAN function (optional);
lBuilt-in high-capacity independent transceiver FIFO buffer, support for FIFO, to prevent data loss
Access method | 10/100Mbps |
Standard | IEEE 802.3 10BASE-T , IEEE 802.3u 100BASE-TX and 100Base-FX |
Wavelength | 850nm/1310nm/1490nm/1550nm |
Distance | Twisted pair: CAT 5/6 (up to a maximum distance of 100M) Optical fiber (multimode): 50/125,62.5/125μm (the longest distance 2~ 5KM) Optical fiber (single mode):8/125,8.7/125,9/125,10/125μm (the longest distance 20~120KM) |
Port | 1 optical port and 8 RJ45 ports |
Data transmission | media conversion, storage forwarding / direct |
Duplex status | Full-duplex status: Flow control, half-duplex status: Back-pressure mode |
Delay | storage and forwarding: 9.6us, through: 0.9us; bit error rate: can be ignored |
LED Indicators | PWR, FX1 TP1 TP2 TP3TP4 TP5 TP6 TP7 TP8 |
External power supply | AC110V ~ 240V, DC 5V 2A, DC-48 |
Power consumption | 10W |
Operating temperature | -10 ~ 60 ℃ |
Storage Temperature | -40 ~ 70 ℃ |
Operating humidity | 5%~90% non-condensing |
Product Size | 127mm * 95mm * 27mm |
Package weight | Net weight: 422g (equipment); Power: 95g; GW: 710 g |
Product Size | 127mm * 95mm * 27mm |
Package weight | Net weight: 422g (equipment); Power: 95g; GW: 710 g |
GLOBAL MARKETING NETWORK